How To Install Window Blinds In Riverside

Countless Riverside families turn to window blinds when they require more privacy and governance over daylight in their interiors. They’re a practical and economical window covering. Skilled do-it-yourselfers may also install them in just a few steps. However, nothing is more convenient than hiring a qualified window treatment installer. Here are the basics of putting up window blinds and when you ought to contact the professionals to handle it for you.

Get Exact Measurements

Before you begin, decide if you want outside-mount or inside-mount blinds. This vital detail will let you know where to measure. Get measurements of the height, depth, and width within your window frame for inside-mount blinds. When attaching outside-mount blinds, measure the width and height of your window, counting the trim, and then lengthen your measurements by three inches to make sure you get adequate coverage. Measure precisely–don’t round up or down. Ill-fitting blinds will fail to operate smoothly.

Order Your Blinds

Once you get your measurements, you can shop for blinds. You might already know what type of blinds you would like. Buy blinds that coincide with your measurements as closely as possible. Off-the-rack blinds may not fit exactly, either jutting out too far or not meeting the end of the window properly. Be sure to get fasteners that let your blinds hang at the right depth, as well. You’ll want to choose custom-made blinds and parts for a superior fit.

Install Your Blinds

Your blinds may be accompanied by instructions. Follow them to affix your exact product. If you want a sample of how challenging it is to install window blinds in Riverside, here is a summary of common steps to give you a better understanding.

 

Inside Mount Blinds

 

1. Place a bracket at the top of the inside of the window around an inch from the edge. Check that this spot won’t hinder the blind’s operation. Outline the bracket holes using a pencil.
2. Drill pilot holes on your marks.
3. Line up the bracket where you drilled and drill in the screws.
4. Duplicate these first three steps for the next bracket.
5. Place the end caps onto the top rail of your blinds. Fit the headrail into the brackets.

Attach the tilt wand and check it. Additionally, evaluate the pull cord.

Outside Mount Blinds

1. Decide if you’re mounting on the wall above the window or the window’s trim. Grasp the headrail and ensure the blind extends to the lower edges of the window.
2. Mark the ends of the headrail.
3. Measure four inches from each headrail mark and mark here for the screws.
4. Drill pilot holes on your marks.
5. Situate the brackets with your wall holes and attach with screws at each end.
6. Slide the blind rail into the brackets.

Attach the tilt wand and try out everything to ensure it works.

Pick The Most Effortless Way To Install Blinds 

As you know, you don’t have to install blinds yourself. The simplest way to install window blinds in Riverside is to seek out an expert window treatment installer. They will work with you at every step. They’ll help you select blinds that match your requirements, make exact measurements for a custom-made product, and put them up for you. They support customers each day, so they’ll do it swiftly and accurately. They will troubleshoot any issues without wasting hours looking for help online. A window treatment expert will also provide higher-quality blinds than large retail outlets or online marketplaces.

Save Yourself The Trouble And Have Sunburst Shutters Install Your Window Blinds In Riverside

Getting new window blinds in Riverside couldn’t be more effortless when you work with Sunburst Shutters Riverside. We’ll help you choose made-to-order blinds that will fit your windows exactly, and our professional installation team will affix them for you. All you have to do is call 951-517-3030 or submit the form below to arrange a complimentary in-home consultation.